Skip to product information
1 of 1

ALLEGRO

Allegro Microsystems DABIC-5 8-Channel Source Driver with Overcurrent Protection, Part #: UDN2987LWTR-6-T | DEX

Allegro Microsystems DABIC-5 8-Channel Source Driver with Overcurrent Protection, Part #: UDN2987LWTR-6-T | DEX

Regular price $96.93 USD
Regular price $96.93 USD Sale price $96.93 USD
Sale Sold out
Shipping calculated at checkout.

Allegro Microsystems DABIC-5 8-Channel Source Driver with Overcurrent Protection, Part #: UDN2987LWTR-6-T | DEX is used as an interface between standard low-level logic and relays, motors, solenoids, LEDs, and incandescent lamps. This device includes thermal shutdown and output transient protection/clamp diodes for use with sustaining voltages to 35 V.

In this driver, each channel includes a latch to turn off that channel if the maximum channel current is exceeded. All channels are disabled if the thermal shutdown is activated. A common FAULT output is used to indicate either chip thermal shutdown or any overcurrent condition. All outputs are enabled by pulling the common OE/R input high. When OE/R¯ is low, all outputs are inhibited and the eight latches are reset. The OE/R¯ function can be especially important during power-up, in preventing floating inputs from turning on the outputs.

Under normal operating conditions, each of eight outputs will source in excess of 100 mA continuously at an ambient temperature of 25°C and a supply of 35 V. The overcurrent fault circuit will protect the device from short-circuits to ground with supply voltages of up to 30 V.

 

ALE:UDN2987LWTR-6-T 

UDN2987LWTR-6-T 

View full details