The industry’s first embedded programmable logic device (PLD) family, providing System-on-a-Programmable-Chip (SOPC) integration – Embedded array for implementing megafunctions, such as efficient memory and specialized logic functions – Logic array for general logic functions. High density – 10,000 to 250,000 typical gates – Up to 40,960 RAM bits; 2,048 bits per embedded array block (EAB), all of which can be used without reducing logic capacity. System-level features – MultiVoltTM I/O interface support – 5.0-V tolerant input pins in FLEX® 10KA devices – Low power consumption (typical specification less than 0.5 mA in standby mode for most devices) – FLEX 10K and FLEX 10KA devices support peripheral component interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 2.2 – FLEX 10KA devices include pull-up clamping diode, selectable on a pin-by-pin basis for 3.3-V PCI compliance – Select FLEX 10KA devices support 5.0-V PCI buses with eight or fewer loads – Built-in Joint Test Action Group (JTAG) boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990, available without consuming any device logic.
Intel FPGA - Field Programmable Gate Array part # EPF10K100ABC356-3